best zero clearance table saw insert

Every table saw doesn’t come with the zero clearance insert on their sharp blade. Though it is not a big deal for the professionals, it can be an issue for the DIYer. 

If your table saw doesn’t have it, you can easily make one by following the steps given in this article. But I know some of you doesn’t have the patience to make one. You want a pre-made version of it. 

Just for you people today I am here with some of the best zero clearance table saw insert reviews. All of them are handpicked by professional woodworkers after intense testing. 

In this review, you will find their features which will help you to pick the right one. So, without further ado let’s begin.

At A Glance: Best Zero Clearance Table Saw Inserts

ImageProduct Name MeasurementCompatibility Check Price
LEECRAFT RIDGID R451215 1/8x 3 3/4x 1/8 -inchesRIDGID R4512 table saw
Peachtree Woodworking PW95513 3/8 x 3 3/4 x 1/2 -inchesDelta table saw
Ryobi BT30003.2x6.5x14.8-inchesRyobi BT3000 10" Table Saw
Leecraft CR-114 x 3 3/4 x 3/16 -inchesRIDGID TS2400, TS2424, TS2412 and Sears Craftsman 10-inch table saw models 1977 to mid-2004
Leecraft DW-213 5/8 x 3 3/4 -inchesDewalt DW744 & DW746
Leecraft BH-113 9/16 x 3 3/4 x 7/16 -inchesJobsite table saw series 4000/4100

Best Zero Clearance Table Saw Insert Reviews

Key Features:

  • Measurement of the Leecraft zero clearance table saw insert is 15 1/8x 3 3/4x 1/8 -inches.
  • Compatible with Ridgid professional table saw model R4512.
  • Doesn’t feature riving knife slot.
  • Made from sturdy phenolic.
  • Featuring a coated upper surface.

LEECRAFT Zero-Clearance dado Insert is specially made for Ridgid R4512 professional table saw. The R4512 comes with a pre-attached dado insert. But if you want to replace for some reason, the LEECRAFT will be the best choice.

LEECRAFT dado insert is made from high-quality phenolic which made this sturdy enough to take care of the tough tasks. The surface of this accessory is coated with special elements. So, you won’t feel any friction during the cutting operation.

It is one of the best DIY zero clearance table saw inserts because it comes with pre-made holes for easy installing. But it doesn’t come with any slot to accommodate the table saw a riving knife.

What We Like

  1. Comes with the coated body.
  2. Easy to install.

What We Dislike

  1. Doesn’t have a slot for the riving knife.

Key Features:

  • Peachtree Woodworking Supply  PW955 is customizable.
  • Comes with pre-made screw holes.
  • Can prevent tear-out.
  • The dimension is 13 3/8 x 3 3/4 x 1/2 -inches.

Sometimes the positioning of the blade holes on the dado inserts are not conventional to the woodworkers. So, they demand a raw insert. And it is easy for them to customize as they want. If you are looking for like them you can take a look at the Peachtree Woodworking PW955.

First thing first, the zero clearance is specially made for Delta table saw. So if you got another brand you may look next to find the right one from these best zero clearance table saw insert reviews.

Peachtree PW955 Table Saw Zero Clearance Insert is made from sturdy material. And it is almost blank so that anyone can customize it as his preference. The PW955 just comes with some screw holes and a safety pin on its rare.

What We Like

  1. Featuring screw holes.
  2. Have a safety pin on the rear.

What We Dislike

  1. Doesn’t have a slot for the riving knife.

Key Features:

  • Simple looking polished body.
  • Featuring pre-made holes.
  • Doesn’t have the riving knife slot.
  • Compatible with Ryobi BT3000 table saw.
  • Measuring 3.2×6.5×14.8-inches.

Ryobi is one of the most popular tool brands who are dominating the tool market with their collection of futuristic tools. So, it is normal if you have a table saw from Ryobi brand.

Sometimes the accessories of the saw can be damaged and it needs to be replaced. If it is the case for your Ryobi BT3000 table saw, you should check out the Ryobi throat plate. The replacement zero throat plate is made especially for that specific table saw at least the measurement says so.

The Ryobi zero clearance table saw insert is made from sturdy material (and it is not wood). It comes without any blade or riving knife port. Ryobi BT3000 10-inch table saw replacement zero throat plate comes with just 4 screw holes. That means it offers you a full customization option.

What We Like

  1. Has screw holes.
  2. Customizable.

What We Dislike

  1. Doesn’t have pre-made riving knife slot.

Key Features:

  • Measuring 14 x 3 3/4 x 3/16 -inches
  • Featuring screw holes.
  • A big hole for easy pulling.
  • Comes with a smooth finish.

Next product in the list of best zero clearance table saw insert reviews is Leecraft CR-1. Before we go further, first let’s see it’s compatibility. The CR-1 is compatible with RIDGID TS2400, TS2424, TS2412 and Sears Craftsman 10-inch table saw models 1977 to mid-2004 saws. If your saw is anyone from this list, you need to check it because most probably it is the only option you have.

Leecraft CR-1 comes blank with just 4 holes for screws on it. You won’t find any pre-made slot for table saw blade or the riving knife. So, you can customise the zero clearence insert as you want to. However, you don’t need to make a finger hole on it because it is already there. 

What We Like

  1. Prevent extra friction.
  2. Easy to customize.

What We Dislike

  1. This also doesn’t have the slot for the riving knife.

Key Features:

  • Made with high-quality phenolic laminate.
  • Measuring (LxW) 13 5/8 x 3 3/4 -inches
  • Featuring finger hole for easy pulling out.
  • Has holes for screw.

At no 5 of this best zero clearance table saw insert reviews have Leecraft DW-2. people who are looking for a dado insert for their Dewalt DW745 and DW744, DeWalt DWE7480 and DW746, DWE7499GD, DWE7490X, and DWE7491RS.

The accessory is made from high-quality dense phenolic laminate and backed up by a surface made of bonded-melamine. The melamine surface is slippery and it doesn’t make friction.

You won’t find any slot for accommodating the table saw blade riving knife in this. But the manufacturers have put a blade slot (unfinished), to curve down it, you need to install the zero clearance on the saw. When you will start the table saw for the first time Leecraft DW-2 on it, the blade will make its way out.

What We Like

  1. Smooth finish.
  2. Easy to use.

What We Dislike

  1. Riving knife slot is unavailable.

Key Features:

  • Made from high-quality phenolic laminate.
  • Has a riving knife slot.
  • Finger hole for pulling the zero clearance table saw insert.
  • Comes with screw holes. 
  • Measuring 13 9/16 x 3 3/4 x 7/16 -inches.

Do you have Jobsite table saws from the 4100/4000 series and need zero clearence table saw insert for them? If the answer is yes then Leecraft BH-1 will be your one and only option to have.

It is not just an ordinary one, actually, it is one of the best zero clearance table saw inserts you can have on the market. Unlike others reviewed in this list, it features a slot for slot for the riving knife. 

High-quality phenolic laminate made Leecraft BH-1 ensures quality and it will serve you for years after years. The device is fully customizable according to your table saw blade, as it doesn’t come with the pre-made blade slot. So, make that in your first blow.

What We Like

  1. Slot for a riving knife.
  2. Easy to use.

What We Dislike

  1. Doesn’t have pre-made blade slot.

Best Zero Clearance Table Saw Insert Buying Guide

Though zero clearance table saw insert is the simple looking accessories, still you need to consider some facts before you buy one. And below I have listed some important of them which will help you to pick the right one.

Material

Material is the first and foremost fact you need to keep an eye on when you decided to buy any type of tool. Though a zero clearance table saw insert is an accessory, the rule is the same.

If you look closely to some of the best zero clearance inserts, you will notice that all of them are not made from the same material. Wood, melamine and phenolic laminate are the most common materials for them. But I personally prefer the sturdy phenolic laminate among them.

Compatibility

Every table saw has its own characteristics. And it varies from their model to model. All the table saws don’t support the same blade and accessories. So, it is common that the different model of table saws have their specific zero clearance insert measurements. Sometimes it is natural to have the same size blade on the different table saw with different size insert. So, before you pick one for your garage’s table saw, be sure about its measurement. My list of best table saw zero clearance insert will help you to pick the right one.

Designs

In general, all the zero clearance inserts look the same. But if you look closely, you will find some significant tiny differences. And screw hole positioning, riving slot, finger hole are the most important among them. 

Zero clearance table saw insert fits with the slot perfectly. So, if your one doesn’t have the finger hole, you will be in deep trouble to pull it out from the slot when not needed.

Most of the table saw zero clearance insert doesn’t come with a riving knife slot. They are actually customizable.

FAQ

Q: It is essential to have a zero clearance table saw insert? 

A: The zero clearance table saw insert protects the user from sudden kickback occurred by the wood jamming between the throat palet and blade kerfs.

Q: What is the universal zero clearance table saw insert? 

A: As the model of this table accessory varies from saw to saw it is impossible to find the universal zero clearance table saw insert.

Closing Word

I am done for today. Hope you have enjoyed it and already have found your desired zero clearance table saw inserts. If not, pick that one which is compatiable with your woodworking table saw.

Here are the other tool reviews.

  1. Woodworking Table Saws.
  2. Futuristic Miter Saws
Best Zero Clearance Table Saw Insert Reviews
5 (100%) 3 votes

Similar Post

Leave a Comment

Your email address will not be published. Required fields are marked *