Best Saw For Cutting Laminate Flooring

10 Best Saw For Cutting Laminate Flooring | Our Honest Reviews

Laminate is produced using squeezed wood; it is much reliable and impedes scratches, dampness, and mileage. Laminate flooring is also incredibly viable and is a decent decision for homes with kids and pets.

Laminate flooring is inevitable regarding fading. While laminate can blur when presented to sunlight over a significant amount of time, it is safer than vinyl flooring. Laminate flooring is simpler to clean also.

Whether you are a professional or not, you will need a laminate floor cutter for a smooth and hassle-free cut. You have to choose the Best Laminate Cutter based on your project genre and your professionalism.

The following list of the Best Saw for Cutting Laminate flooring will help you in this case.

The 10 Best Saw For Cutting Laminate Flooring

Here in the article, we have reviewed several of the best saw for cutting laminate flooring according to our research. Hopefully, you find the article helpful.

01. EAB Tool Exchange Flooring Cutter Review

Product Features:

  • Heavy duty
  • Affordable
  • Super performer
  • Durable
  • Sustainable
  • Sharp cutter
  • Extendable Handle
  • Professional level

EAB Tool Exchange-a-Blade 2100005 9-Inch Laminate Flooring Cutter is intended to cut overlay, vinyl, sturdy wood, and designed deck up to 15mm (5/8″). Will likewise cut fibre concrete siding, for example, hardier plank. It slices up to 9″ wide, and its edge check takes into account slices up to 45 degrees. 

The Handle can be reached out for extra influence when cutting thicker /denser materials. At the point when the sharp edge wears out, you can alter it by separating the screws in the base and pivoting the two pads with the goal that you get a residue-free cutting unfailingly. When it’s dull, you can likewise change your cutting edge for another one. 

To work with the sharpening stone, you should simply lift the cutting edge, set the stone, and slide it through on the two sides. This removes any burr off the edge of the cutting blade and expels any gum development from the cement that is a piece of the cover flooring.

Pros:

  • Dirt-proof operation
  • Extendable Handle
  • Stress-free Blade Replacement 
  • Blade sharpening stone
  • No need for electricity
  • Professional-level performance

Cons:

  • There is complains about screws
  • It can merely cut vertical to length 

02. MantisTol 8 .5 (218mm)cutter Review

Product Features:

  • Straight cut
  • Angle cut
  • Noise-free
  • Dust-free
  • Replaceable blade

MantisTol 8 .5″ 218mmcutter is designed for cutting SPC, LVP,  LVT, WPC, PVC, VCT, Vinyl Plank Flooring. It provides a dust-free, noise-free professional cut on the vinyl floor. There is no need for electricity, and it Saves time.

It can give you Angle cut, Straight cut, ” L and ” cut, and Lengthwise cut with Clearly checked estimating guide. You will get 0-45° Angle Cutting, Cutting max up to 8mm profundity. Translational cutting, the depth of the throat is 115mm/4.5inch. Simple to utilize and to heft around, almost sure that you will like it.

The item has a 2.2mm thick tungsten steel sharp edge, incorporating a 600 Grit oil-stone to keep it sharp. At the point when the cutting edge becomes dull, you must fix the sharpness of the edge. Else it will rapidly end the administration life. You can replace the blade also.

Pros:

  • Multiple cutting application
  • Deep throat
  • Can provide “L & U” cut
  • Replaceable blade
  • Dust and noise-free cut

Cons:

  • Requires maintenance

03. SKIL 3601-02 Flooring Saw Review

Product Features:

  • Weight- 24 lbs
  • 4.375″ Blade Diameter
  • Miter gauge- 0°, 22.5°, and 45°  
  • Rating- 120V
  • Amperage- 7.0
  • No-load RPM- 11,000
  • 36 Carbide Tilted Teeth

SKIL 3601-02 7.9 Amp Flooring Saw is a fantastic device for putting in new wood flooring. Make a cross, Miter, and tear cuts in strong hardwood, built and cover flooring directly in a similar room where it’s being introduced. That implies not any more running to and fro outside to make cuts on a Miter or table saw in the light of the fact that the ground surface saw can do them all. The durable minimized structure makes it simple for any DIYer to utilize, transport, and store. 

Its lightweight design makes it simple to move and use in any task area. Miter Gauge guarantees detents at 0°, 22.5°, and 45°, giving adaptability for various sorts of cuts. Die-Cast Aluminum Miter and Rip Fence are steady, Sturdy, and durable. Included dust bag will remove your tension about dust.

Pros:

  • A saw blade with 36 teeth
  • Perpendicular Work-piece Clamp
  • Aluminium Miter and fence
  • Lightweight and easy to carry
  • Provides several angled cuts
  • Better than a Miter saw or table saw
  • High user satisfaction

Cons:

  • Shows little bit problem with wide boards as it’s not reversible 

04. Bullet Tools Flooring Cutter Review

Product Features:

  • Versatile
  • Light duty
  • Cuts up to 288mm width and 14mm thick
  • 109B blade
  • Aluminium fence
  • Dust-free

Bullet Tools 9 inch Laminate Flooring Cutter is a Heavy obligation apparatus and simple to use. It gives Exact cuts. Finishes your stresses over getting sawdust everywhere throughout your home or project area. 

This flooring shaper accompanied the preassemble structure and prepared to utilize condition. The machine likewise accompanies a larger than average handle. Along these lines, this gear conveys better influence to keep up consistency while cutting tiles. Besides, the overlay floor shaper can cut tiles with the most extreme thickness of 16-inch. You can radically cut through a flooring with the most elevated width of 9-inch. 

The machine additionally joins a 2-position Aluminum fence. Moreover, the 6-inch board permits you to slice slabs up to – 45-degree point.

Pros:

  • Multipurpose usability
  • Easy to operate
  • Free of dust
  • Requires no power source
  • Cuts in different angles and width

Cons:

  • Leaves slop on one side and chip the other side

05. MantisTol Pro Flooring Cutter Review

Product Features:

  • Versatile
  • High-quality Steel
  • Heavy-duty 
  • Light-weight
  • Durable
  • 36-1/2″ Handle
  • cutting length: 330 mm
  • cutting depth: 16 mm
  • Angle Cutting: 0-45°
  • 600 grit Oilstone

MantisTol 13” Pro Flooring Cutter comes with Strong great-quality steel and heavy obligation aluminium structure. Besides, a 4 mm thick tungsten steel sharp blade incorporated a 600 Grit oilstone to keep the cutter sharp. On the off chance that you use it for business purposes, ensure you have an extra new cutting blade. It has 36-1/2″ Handle for expanded influence with less exertion. No power is required, and it’s residue-free, tranquil, speedy, and easy to utilize. 

This 13-inch cover floor shaper is notably light in weight. Along these lines, you can just utilize and move the machine according to your requirements. The tile shaper likewise takes a shot at the floors such as tiles, bamboo, parquet, durable wood, deck-sections of flooring, and more. You can also utilize this floor mess for vinyl, SPC, LVP, LVT, WPC, and different floor materials.

Pros:

  • Applicable to different materials
  • Comfortable Handle requires less effort
  • Sturdy steel structure
  • Movable as per task requirement
  • Free of dust
  • No need for electricity

Cons:

  • You may face a little hassle to cut small pieces

06. Norske Tools Flooring Cutter Review

Product Features:

  • Multi-material cuts
  • 13″ Cutting
  • 41″ Operational length
  • 28-1/2″ Handle
  • 22″ aluminium fence
  • Bonus accessories
  • dust-free

The 13 inch’s industrial Siding and Laminate Flooring Cutter has a 28-1/2 inch’s Handle for expanded influence and a sliding augmentation table to help longer sheets with a working length of 41 inches. 

The regulating measuring gauge takes into consideration fast dreary cutting while the uncompromising 22 inch’s aluminium fence and strengthened tabletop give included quality and solidness. Calculated cuts are made simple with the improved laser-carved table Miter check for 15, 30, and 45-degree cuts. 

It cuts an assortment of materials containing overlay flooring, fibre concrete board, designed wood, and vinyl siding up to 13 inches wide and 19/32 inches thick. You will get bonus frill Kits incorporates tapping square, pull bar, hammer, and 16 PVC inserts, which are values $30.

Pros:

  • Enormous cutting ability
  • Adjustable measuring gauge and laser carved table meter
  • Cuts several materials
  • At least $30 valued bonus accessories
  • 13 inch’s extraordinary speed blade

Cons:

  • There are no cons noticed yet 

07. ROBERTS 10-35 Laminate Cutter Review

Product Features:

  • 8″ width cut
  • 10mm thick cut
  • Steel body frame
  • Heavy-duty
  • Affordable

ROBERTS 10-35 Laminate Cutter is intended to slice cover boards up to 8″ wide and 10mm thick. This would work immaculately with the thickness you’re using. The leading body of the tool saves the boards into a spot for smooth and exact cutting. It takes a brief period to become accustomed to; however, it ought to work. 

This device permits individuals to remain upstairs and make the cuts right where they are working. You don’t need to run outside to utilize a saw or utilize a saw in the room you work, which would have been dusty wreckage. The main issue somebody may have is it takes some muscle to make the cuts. It is not so effortless.

Pros:

  • Securely stable for user
  • Steel body frame makes it viable
  • Easy to move
  • Comfortable Handle

Cons:

  • Requires enough physical stamina
  • A handful for small projects only

08. EAB Tool 2100017 Floor Cutter Review

Product Features:

  • Heavy duty
  • Affordable
  • Super performer
  • Durable
  • Sustainable
  • Sharp cutter
  • Extendable Handle
  • Industrial level

EAB Tool 2100017 13-Inch Laminate Flooring Cutter is intended to cut overlay, vinyl, sturdy wood, and designed deck up to 15mm (5/8″). Will likewise cut fibre concrete siding, for example, hardier plank. It slices up to 13″ wide, and its edge check takes into account slices up to 45 degrees. 

The Handle can be reached out for extra influence when cutting thicker /denser materials. At the point when the sharp edge wears out, you can alter it by separating the screws in the base and pivoting the two pads with the goal that you get a residue-free cutting unfailingly. When it’s dull, you can likewise change your cutting edge for another one. 

To work with the double-sided sharpening stone, you should simply lift the cutting edge, set the stone, and slide it through on the two sides. This removes any burr off the edge of the cutting blade and expels any gum development from the cement that is a piece of the cover flooring. Included bonus setting up Equipment will give you an industrial level result.

Pros:

  • Dirt-proof operation
  • Extendable Handle
  • Stress-free Blade Replacement 
  • Blade sharpening stone
  • No need for electricity
  • Industrial level performance

Cons:

  • There is complains about screws
  • It can merely cut vertical to length 

09. Goplus Laminate Flooring Cutter Review

Product Features:

  • High quality
  • Steel body
  • Max cutting length: 12″
  • Max cutting depth: 0.5”
  • Moveable V support
  • Comfortable Handle
  • Viable lifetime

Goplus Laminate Flooring Cutter is made of overwhelming metal steel, and it is strong and sturdy to use for a long haul. It isn’t just minimal and simple to utilize, yet additionally difficult to turn over. The cover flooring handle shaper has a comfortable grasp handle. It limits client exhaustion. This guarantees comfort when you use it, yet additionally ensures security for you. The all-inclusive Handle builds influence. Also, you can utilize it efficiently. 

The cutter can without much of a stretch slice laminate up to 8″ or 12” wide and 0.5″ thick. It is appropriate for four sorts of cuts, which incorporate L cut, free-angle cut, the lengthwise cut, and straight cut. The cutter has a versatile V support, which can be utilized to keep the load up level and cut simultaneously. Also, it tends to be put away in a bureau or cabinet without occupying an excess of room. 

The bundle accompanies brief and precise guidance; you can complete the get assembly in a couple of steps without anybody’s assistance. Also, a smooth surface makes it simpler to clean and keep up.

Pros:

  • Steel body-frame makes it viable
  • Handy V-support to enhance its performance
  • Grips on Handle make it comfortable
  • Multiple shaped cuts
  • Secured for user

Cons:

  • Requires humble installation
  • Requires so much physical stamina

10. Laminate ET-210 Floor Cutter Review

Product Features:

  • High quality
  • Steel body
  • Max cutting length: 12″
  • Max cutting depth: 11mm
  • Moveable V support
  • Durable

Laminate Floor Cutter ET-210 is made of solid metal steel; it is durable and solid to use for a long haul. It isn’t just minimal and simple to utilize, yet additionally tricky to turn over. 

The cutter can without much of a stretch slice laminate up to 8″ or 12” wide and 11mm thick.760mm/30-inch handle, can lessen the weight and improve the force arm. Functions admirably both width and length cuts. You need to cut a little distance each time to guarantee that the long way cuts are precise and straight. 

The cutter has a moveable V support, which can be utilized to keep the load up level and cut simultaneously. The bundle accompanies brief and precise guidance; you can complete the gathering in a couple of steps without anybody’s assistance. Additionally, a plane surface makes it simpler to clean and keep up.

Pros:

  • Steel body-frame makes it viable
  • Handy V-support to enhance its performance
  • Affordable in price
  • Enough user satisfaction
  • No need for a power source

Cons:

  • Produces some debris

Buying Guide

There are two types of laminate floor cutter; they are electric and manual. If you want to have an easy task, the electricity will be an extraordinary decision. It works quicker and comes with numerous features. On the other hand, for individuals who need financially savvy execution, at that point, they can consider the manual cutters. 

Cutting width and thickness are significant variables to consider when buying a laminate floor cutter—each model backings various sizes of materials. For instance, the thickness limit is directed by the difference between the blade and the adjustment plate. It is vital to measure the size of the ground surface material you plan to use to guarantee it fits the cutting limit. You should likewise consider probable future tasks, which may include the utilization of more extensive/thicker materials.

A few models are simpler to use than others. Electric models are commonly simpler to utilize than manual models, as far as physical quality alone, while it’s anything but difficult to figure out how to use a manual model. Electric models need more clean-up as they produce much more dust, which makes them somewhat increasingly poorly arranged to utilize. 

Investigate the rundown of materials the model can cut. It may be insightful to pick one that has the capacity to the cutting of numerous kinds, so you aren’t limited later on. 

If you are hoping to have exactness cutting, at that point, go for the one that accompanies pioneering blades. Cutting edges made of tungsten steel material convey productive execution and can perform for a more extended period. You will likewise need to check whether it accompanies a honing stone that lets you have better sharpness of the blade.

There are often bonus tools such as V-support with floor cutters to ensure your convenience of work. Have a look at that feature before deciding your purchase because these tools provide some handy support.

It’s not an easy task to select a perfect product for your own, but you have to conscious about the features provided by the product. Now you have enough idea about Best Laminate Floor Cutters on the market, and it would help you to choose must have one for you. Just before that, you have to be sure about which type of tasks you are going to operate at present and in the future.

frequently asked questions (FAQ)

01. What type of saw is used to cut laminate flooring?

Answer: A chop saw, a circular saw or a table saw can be used to get a straight cut. The best blade is a blade that has a hundred or more tooth, which can reduce chipping. 

02. Do you need a special blade to cut laminate flooring?

Answer: A blade with 80-100 tooth is enough to cut a laminate floor. Carbide-tipped blades are the perfect laminate cutter, and they last for a long time. Make sure that your blade is not a dull one.

03. What is the speciality of laminate floor cutters?

Answer: If you want to get smooth and precise cuts for your projects, laminate floor cutters can be the best solution. Be sure that the blade can be sharpened and replaced.

04. Can I use a laminate cutter to cut other types of flooring material?

Answer: Though the fact is that their initial use is for slicing laminate ground surface to a predetermined length, a few cutters can also be utilized to cut different kinds of material, for example, vinyl and PVC tile. Look at our descriptions above to discover which cutters can cut various types of material.

05. Can a tile cutter cut laminate?

Answer: You should have a cutter which can cut up to 8″ width and 10mm thickness to cut natural laminate flooring. Therefore, if the tile cutter has 8″ blade length and it can cut an 8″ wide laminate.

Conclusion

With the knowledge from the reviews of the above anyone can easily select their Best choice. Every product of the list mentioned earlier is the top-rated product.

Some of the best laminate floor cutters come with several different features, and you will be confounded by the advertisement. This article intended to solve your dilemma regarding all the features.

With all the necessary features, some brands offer total starter units which can even incorporate grindstones. However, paying little heed to the picked laminate cutter, the correct strategy should be drilled for better cuts.

The capacity of the selected cutter should also be matched with your project. Then you will get a perfect cut by your preferred Laminate Floor Cutter.

James Johnson

James Johnson

Hi, James speaking. I'm a handyman with my own home service startup and a writer. Friends call me tools-nerd, where I call myself a machine-enthusiast. I'm working as a co-editor at Review Infinite, and I'm so in love with my job.

Similar Post

Leave a Comment

Your email address will not be published. Required fields are marked *

We love to save your time and utilizing ours to select the best product for you. From the passion of researching everyday products, we are here to help people and making our business a top service provider. So, keep going with us and own the best according to your need. We can assure you; it will be a worth buying. They are the best of best.

OUR SOCIAL PROFILES

GET IN TOUCH

Disclaimer:
Reviewinfinite is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon, Amazon.com, the Amazon logo, AmazonSupply logo, and AmzonSupply are trademarks of Amazon.com.inc or its affiliates.

Reviewinfinite.com is supported by its audience. When you buy through links on our site, we may earn an affiliate commission. Learn more

Scroll to Top